Pad Frame Test Logics: Difference between revisions

From LibreSilicon
Jump to navigation Jump to search
Created page with "== 8 bit ring counter == == I/O pad drive mode test == == clock net loop back == The clock net loop-back is simply one of the pads, being permanently configured as an input, passing on the clock signal to all the other test circuits on the die, as well as directly passing it to a pad directly configured as output with active driver. This test configuration allows us to measure clock skew and maximum clock propagation between input and output pads cells."
 
Line 1: Line 1:
A collection of simple functionality tests for verifying the proper behavior of a pad frame when porting [[LibrePDK]] to a new technology node.
Below the functions are being documented.
== 8 bit ring counter ==
== 8 bit ring counter ==



Revision as of 18:31, 10 November 2026

A collection of simple functionality tests for verifying the proper behavior of a pad frame when porting LibrePDK to a new technology node.

Below the functions are being documented.

8 bit ring counter

I/O pad drive mode test

clock net loop back

The clock net loop-back is simply one of the pads, being permanently configured as an input, passing on the clock signal to all the other test circuits on the die, as well as directly passing it to a pad directly configured as output with active driver.

This test configuration allows us to measure clock skew and maximum clock propagation between input and output pads cells.