Pad Frame Test Logics

From LibreSilicon
Revision as of 18:29, 10 November 2026 by Leviathan (talk | contribs) (Created page with "== 8 bit ring counter == == I/O pad drive mode test == == clock net loop back == The clock net loop-back is simply one of the pads, being permanently configured as an input, passing on the clock signal to all the other test circuits on the die, as well as directly passing it to a pad directly configured as output with active driver. This test configuration allows us to measure clock skew and maximum clock propagation between input and output pads cells.")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

8 bit ring counter

I/O pad drive mode test

clock net loop back

The clock net loop-back is simply one of the pads, being permanently configured as an input, passing on the clock signal to all the other test circuits on the die, as well as directly passing it to a pad directly configured as output with active driver.

This test configuration allows us to measure clock skew and maximum clock propagation between input and output pads cells.