Pad Frame Test Logics
A collection of simple functionality tests for verifying the proper behavior of a pad frame when porting LibrePDK to a new technology node.
The base repository with branches for individual generated layouts for test tapeouts, with their GDS files in GIT LFS, can be found here https://gitlab.libresilicon.com/designs/highwaytestchip/-/tree/master?ref_type=heads
Below the functions are being documented.
8 bit ring counter
The idea behind this simple 8 bit counter is manifold
module ring8(
input wire clk,
input wire rst_n,
output wire [7:0] q
);
reg [7:0] q_r;
always @(posedge clk) begin
if (!rst_n) q_r <= 8'b00000001;
else q_r <= {q_r[6:0], q_r[7]};
end
assign q = q_r;
endmodule
First we test whether the library generated for a node generated by LibreStandardCell actually can be turned into a spice model, using Magic's spice extraction, which can be due to still being simple enough, simulated using ngspice and verified that it actually walks.
Additionally, we can determine the maximum clock frequency with which we can clock the ring counter before it stops working while we have it hooked up to an oscilloscope, which allows us to compare the measurements to our ngspice predictions of the circuit and the overall padframe integration.
A switched state test
clock net loop back
The clock net loop-back is simply one of the pads, being permanently configured as an input, passing on the clock signal to all the other test circuits on the die, as well as directly passing it to a pad directly configured as output with active driver.
This test configuration allows us to measure clock skew and maximum clock propagation between input and output pads cells.