GloveBox: Difference between revisions
No edit summary |
No edit summary |
||
| Line 26: | Line 26: | ||
|| ... really? | || ... really? | ||
|- | |- | ||
|A soldering station | |||
||Well... it's used to solder stuff | |||
||I've got this one, it's awesome! -> https://www.aliexpress.com/item/32969863227.html | |||
|} | |} | ||
Revision as of 08:34, 25 August 2022
This is a low cost solution for having a clean room environment for handling dies and other components which require a clean room environment.
While there are commercial solutions available for sale, they typically cost several thousand dollars, while our BOM, even for the big variant, is typically bellow thousand dollars.
The design was originally based on the premise that the whole goal is just to have some quasi-airtight enclosure of some kind, where a circular airflow can be achieved which is purified by pumping the air through multiple stages of HEPA filters, while accessing the objects to be handled by using gloves fixed to the enclosure.
For obvious reasons, a glove box only makes sense when the material to be handled is visible, so acrylic glass was chosen as material for the enclosure.
During the development process it turned out, that just using glue isn't sufficient for holding the sheets of acrylic glass together in a box shape, because the weight of the material, puts too much stress onto the glue, which compromises the isolation and lets external dust enter, additionally, after a while the glue gives up under the mechanical stress, and the box falls apart.
For this reason additional aluminum extrusions are being used, for giving the whole box more stability.
This only increases the cost minimally because the main cost of the BOM ironically is in the acrylic glass.
For the airflow cheap 120mm PC fans like the ones found on AliExpress (https://www.aliexpress.com/item/1005003980506458.html) can be used.
| Name | Description | URL |
|---|---|---|
| Screwdriver (sonic or normal) | Used to screw in the screws (and potentially fighting against Daleks and Cybermen, in case it's actually a sonic one) | ... really? |
| A soldering station | Well... it's used to solder stuff | I've got this one, it's awesome! -> https://www.aliexpress.com/item/32969863227.html |
Large box
The large box
| Component | Amount | Price per Piece | Price Total | URL |
|---|---|---|---|---|
| Gloves | 4 | 9,89€ | 39,56€ | https://www.manutan.pt/pt/map/luvas-em-neopreno-com-manga-comprida-ultraneo-450-a169336 |
| Roll of single sided silicone tape | "enough"... 2-4, depending on the lenght | 2-8€ per roll | 8-32€ | https://www.aliexpress.com/item/1005003961444166.html |
| 12 volt fans | 64 (2*32, top and bottom) | 0,64€ | 40,96€ | https://www.aliexpress.com/item/1005003980506458.html |
| Acrylic glass 50cm x 50cm | 2 | 15,99€ | 31,98€ | https://www.leroymerlin.pt/Produtos/Madeiras-acrilicos/Vidro-acrilico/Acrilico-vidro-sintetico/WPR_REF_81902623 |
| Acrylic glass 100cm x 100cm | 1 | 54,99€ | 54,99€ | https://www.leroymerlin.pt/Produtos/Madeiras-acrilicos/Vidro-acrilico/Acrilico-vidro-sintetico/WPR_REF_81902578 |
Small box
| Component | Amount | Price per Piece | Price Total | URL |
|---|---|---|---|---|
| Gloves | 2 | 9,89€ | 19,78€ | https://www.manutan.pt/pt/map/luvas-em-neopreno-com-manga-comprida-ultraneo-450-a169336 |
| Roll of single sided silicone tape | "enough"... 2-4, depending on the lenght | 2-8€ per roll | 8-32€ | https://www.aliexpress.com/item/1005003961444166.html |
| 12 volt fans | 32 (2*16, top and bottom) | 0,64€ | 20.48€ | https://www.aliexpress.com/item/1005003980506458.html |
| Acrylic glass 50cm x 50cm | 4 | 15,99€ | 63,96€ | https://www.leroymerlin.pt/Produtos/Madeiras-acrilicos/Vidro-acrilico/Acrilico-vidro-sintetico/WPR_REF_81902623 |
| Perforated floor | https://www.leroymerlin.pt/Produtos/Ferragens/Perfis-chapas-e-grelhas/Chapas/WPR_REF_11118485 |