Hafnium oxide deposition (CVD): Difference between revisions

From LibreSilicon
Jump to navigation Jump to search
Line 25: Line 25:
The basic reaction we want to make use of, according to https://patents.google.com/patent/CN100356519C/en (original Chinese version: https://patents.google.com/patent/CN100356519C), is as following:
The basic reaction we want to make use of, according to https://patents.google.com/patent/CN100356519C/en (original Chinese version: https://patents.google.com/patent/CN100356519C), is as following:


[[https://en.wikipedia.org/wiki/Cyclohexane|Cyclohexane]]
[https://en.wikipedia.org/wiki/Cyclohexane Cyclohexane]


HfCl<sub>4</sub> + 2 H<sub>2</sub>O
HfCl<sub>4</sub> + 2 H<sub>2</sub>O

Revision as of 06:15, 12 October 2022

The base of this chemical recipe and processing is Hafnium-Tetrachloride, as it can be seen in the picture.

Hafnium-Tetrachloride

You might notice that Hafnium-Tetrachloride is a solid crystal at room temperature, which is kind of a problem considering that we wanna use it as a vapor in our CVD furnace, in order to react it with oxide for obtaining a Hafnium-Oxide thin film layer.

The equipment required for this process are a CVD and a plasma cleaner for removing impurities after the Hafnium oxide deposition

Chemical properties of Hafnium-Tetrachloride

34591.png


HfCl4 can be produced by several related procedures:

  • The reaction of carbon tetrachloride and hafnium oxide at above 450 °C;
HfO2 + 2 CCl4 → HfCl4 + 2 COCl2
  • Chlorination of a mixture of HfO2 and carbon above 600 °C using chlorine gas or sulfur monochloride:
HfO2 + 2 Cl2 + C → HfCl4 + CO2
  • Chlorination of hafnium carbide above 250 °C.

The result of those chemical reactions is a crystalline powder with a melting point of 432 °C

Processing steps

The basic reaction we want to make use of, according to https://patents.google.com/patent/CN100356519C/en (original Chinese version: https://patents.google.com/patent/CN100356519C), is as following:

Cyclohexane

HfCl4 + 2 H2O → HfO2 + 4 HCl

Since HfCl4 is a solid salt at room temperature, we dissolve it in water (H2O), in a ratio 1:2 and use direct liquid injection for using it in our CVD as the precursor.

The waste result is hydrochloric acid which needs to be continuously flushed out with a gas like Argon

Links

Study HfO2 formation: https://iopscience.iop.org/article/10.1149/MA2005-02/13/547/pdf

DLI: https://www.intechopen.com/chapters/63679