Hafnium oxide deposition (CVD): Difference between revisions

From LibreSilicon
Jump to navigation Jump to search
Tag: Reverted
 
(28 intermediate revisions by the same user not shown)
Line 1: Line 1:
The base of this chemical recipe and processing is Hafnium-Tetrachloride, as it can be seen in the picture.
The equipment required for this process are a CVD and a plasma cleaner for removing impurities after the Hafnium oxide deposition
 
Since HfCl<sub>4</sub> is a solid salt at room temperature, we need to first create a liquid precursor which can be turned into a vapor.
 
The process is based on a [https://download.libresilicon.com/papers/HafniumOxide.pdf Japanese paper] and requires a complex precursor.
 
The synthesis of the [[Hf precursor TDEAH (Hf(NEt2)4)]] is so complex, that it needs its own page.
 
===Precursor injection===


[[File:High-Quality-Hafnium-Chloride-Hafnium-Tetrachloride-Hfcl4-CAS-No-13499-05-3-with-Best-Price.jpg|200px|Hafnium-Tetrachloride]]
[[File:Pressure_TDEAH.png|200px|right|thumb|Vapor pressure]]


You might notice that Hafnium-Tetrachloride is a solid crystal at room temperature, which is kind of a problem considering that we wanna use it as a vapor in our CVD furnace, in order to react it with oxide for obtaining a Hafnium-Oxide thin film layer.
Introduce TDEAH gas into the deposition chamber using a bubbling system, use N<sub>2</sub> as the carrier gas.


The equipment required for this process are a CVD and a plasma cleaner for removing impurities after the Hafnium oxide deposition
To prevent liquefaction of the source before it enters the deposition chamber, maintain the line from the bubbler to the chamber at a temperature of 85°C.


===Chemical properties of Hafnium-Tetrachloride===
Heat the bubbling system chamber to 80°C.


[[File:34591.png|200px|left]]
The flow rate into the CVD chamber should be 40 sccm.


===Oxidizer injection===


HfCl<sub>4</sub> can be produced by several related procedures:
[[File:HFO2_CVD_setup.png|200px|right|thumb|CVD setup]]
*The reaction of carbon tetrachloride and hafnium oxide at above 450&nbsp;°C;
:HfO<sub>2</sub>  +  2 CCl<sub>4</sub>  →  HfCl<sub>4</sub>  +  2 COCl<sub>2</sub>
*Chlorination of a mixture of HfO<sub>2</sub> and carbon above 600&nbsp;°C using chlorine gas or sulfur monochloride:
:HfO<sub>2</sub>  +  2 Cl<sub>2</sub>  +  C  →  HfCl<sub>4</sub>  +  CO<sub>2</sub>
*Chlorination of hafnium carbide above 250&nbsp;°C.


The result of those chemical reactions is a crystalline powder with a melting point of 432&nbsp;°C
Have O<sub>2</sub> in N<sub>2</sub> in a ration 1:99 and feed it into the chamber through a separate nozzle, because otherwise the O<sub>2</sub> decomposes the TDEAH before it can reach the substrate.


===Processing steps===
The flow rate can be varied between 0 and 20 sccm, for obvious reasons you want it higher than zero, because without oxygen you won't get any oxide.


Since HfCl<sub>4</sub> is a solid salt at room temperature, we need to first create a liquid precursor, and use [https://www.intechopen.com/chapters/63679 direct liquid injection] for using it in our CVD.
===Substrate/CVD chamber temperature===
Set a temperature between 300°C and 450°C, in order to control deposition speed.


The process is based on a [https://download.libresilicon.com/papers/HafniumOxide.pdf Japanese paper] and requires a complex precursor.
===CVD chamber pressure===
Set the pressure within the CVD chamber to 1 torr


The synthesis of this the [[Hf precursor TDEAH (Hf(NEt2)4)]] is so complex, that it needs its own page.
===Equipment===


TDEAH (Hf(NEt<sub>2</sub>)<sub>4</sub>)
* Potential CVD furnaces:
** https://www.digiqualsystems.com/products/furnaces/tubular-furnace/horizontal-tubular-furnace/
** https://www.mtixtl.com/ThreeZonesTubeFurnaceHighVacuumMFCGas-OTF-1200X-III-HVC-UL.aspx


===Links===
* Bubblers:
Study HfO<sub>2</sub> formation: https://iopscience.iop.org/article/10.1149/MA2005-02/13/547/pdf
** https://www.mtixtl.com/Bubbler/Evaporatorforliquidsourcesandchemicalprecursors-BL-SS.aspx


A Japanese paper how they grew it with an LPCVD: http://www.trichemical.com/topics/Manuscript%20revisions.pdf
* Mass flow meters
** https://www.mtixtl.com/Liquid-delivery-system.aspx

Latest revision as of 17:33, 14 October 2022

The equipment required for this process are a CVD and a plasma cleaner for removing impurities after the Hafnium oxide deposition

Since HfCl4 is a solid salt at room temperature, we need to first create a liquid precursor which can be turned into a vapor.

The process is based on a Japanese paper and requires a complex precursor.

The synthesis of the Hf precursor TDEAH (Hf(NEt2)4) is so complex, that it needs its own page.

Precursor injection

Vapor pressure

Introduce TDEAH gas into the deposition chamber using a bubbling system, use N2 as the carrier gas.

To prevent liquefaction of the source before it enters the deposition chamber, maintain the line from the bubbler to the chamber at a temperature of 85°C.

Heat the bubbling system chamber to 80°C.

The flow rate into the CVD chamber should be 40 sccm.

Oxidizer injection

CVD setup

Have O2 in N2 in a ration 1:99 and feed it into the chamber through a separate nozzle, because otherwise the O2 decomposes the TDEAH before it can reach the substrate.

The flow rate can be varied between 0 and 20 sccm, for obvious reasons you want it higher than zero, because without oxygen you won't get any oxide.

Substrate/CVD chamber temperature

Set a temperature between 300°C and 450°C, in order to control deposition speed.

CVD chamber pressure

Set the pressure within the CVD chamber to 1 torr

Equipment

Retrieved from "https://wiki.libresilicon.com/index.php?title=Hafnium_oxide_deposition_(CVD)&oldid=363"