Hafnium oxide deposition (CVD): Difference between revisions
Jump to navigation
Jump to search
(→Step 2) |
|||
| Line 15: | Line 15: | ||
===Step 2=== | ===Step 2=== | ||
[[File:HFO2_CVD_setup.png|200px|right|thumb|CVD setup]] | [[File:HFO2_CVD_setup.png|200px|right|thumb|CVD setup]] | ||
Revision as of 19:33, 13 October 2022
The equipment required for this process are a CVD and a plasma cleaner for removing impurities after the Hafnium oxide deposition
Since HfCl4 is a solid salt at room temperature, we need to first create a liquid precursor, and use direct liquid injection for using it in our CVD.
The process is based on a Japanese paper and requires a complex precursor.
The synthesis of the Hf precursor TDEAH (Hf(NEt2)4) is so complex, that it needs its own page.
Precursor injection
Introduce TDEAH gas into the deposition chamber using a bubbling system, use N2 as the carrier gas.
To prevent liquefaction of the source before it enters the deposition chamber, maintain the line from the bubbler to the chamber at a temperature of 85°C.
