Hf precursor TDEAH (Hf(NEt2)4)

From LibreSilicon
Revision as of 14:20, 12 October 2022 by Leviathan (talk | contribs)
Jump to navigation Jump to search

The base of this chemical recipe and processing is Hafnium-Tetrachloride, as it can be seen in the picture.

Chemical properties of Hafnium-Tetrachloride

34591.png


HfCl4 can be produced by several related procedures:

  • The reaction of carbon tetrachloride and hafnium oxide at above 450 °C;
HfO2 + 2 CCl4 → HfCl4 + 2 COCl2
  • Chlorination of a mixture of HfO2 and carbon above 600 °C using chlorine gas or sulfur monochloride:
HfO2 + 2 Cl2 + C → HfCl4 + CO2
  • Chlorination of hafnium carbide above 250 °C.

The result of those chemical reactions is a crystalline powder with a melting point of 432 °C

Hafnium-Tetrachloride

You might notice that Hafnium-Tetrachloride is a solid crystal at room temperature, which is kind of a problem considering that we wanna use it as a vapor in our CVD furnace, in order to react it with oxide for obtaining a Hafnium-Oxide thin film layer.

This is the structure of the organic precursor for Hafnium oxide deposition in a CVD (Hafnium_oxide_deposition_(CVD))

TDEAH.png

as described in the following Japanese paper

WARNING! This chemical reacts VIOLENTLY with water and humidity in general! Caution is required when dealing with it!

Atmospheric requirements

Since this mixture and its components react with oxygen and humidity, we need to use a Schlenk tube setup for mixing it, because we can only do it in an inert atmosphere.

Chemical reaction

With a temperature of 117°C and a pressure of 0.04 torr the following reaction will occur within an inert atmosphere (Argon/Nitrogen):

HfCl4 + Et2NLi → TDEAH (Hf(NEt2)4)

The yield typically is around 60%

The waste products will be some carbon hydrates (not the stuff in white bread)