Danube River: Difference between revisions

From LibreSilicon
Jump to navigation Jump to search
No edit summary
No edit summary
Line 2: Line 2:


So far, the only opportunity we had to try the new test layout generator, was with Global Foundries on their 180nm node, of which the result can be seen in the picture below:
So far, the only opportunity we had to try the new test layout generator, was with Global Foundries on their 180nm node, of which the result can be seen in the picture below:
[[File:Danube GF180.png|left|A successful tapeout with GF180|alt=A successful tapeout with GF180|frame]]
[[File:Danube GF180.png|A successful tapeout with GF180|alt=A successful tapeout with GF180|frame|none]]
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
== GDS2 view ==
== GDS2 view ==
The upper left section in the above image corresponds with the layout extracted from KLayout, when opening up the [https://gitlab.libresilicon.com/generator-tools/danube-river/-/blob/master/tapeout/gf180.gds?ref_type=heads layout used for the tape-out]
The upper left section in the above image corresponds with the layout extracted from KLayout, when opening up the [https://gitlab.libresilicon.com/generator-tools/danube-river/-/blob/master/tapeout/gf180.gds?ref_type=heads layout used for the tape-out]
[[File:KLayout view- Danube GF180.png|left|500x500px|The KLayout view of the Danube GF180]]
[[index.php?title=File:KLayout_view-_Danube_GF180.png|alt=The KLayout view of the Danube GF180|none|frame|KLayout view of the Danube GF180 layout]]
 
 
 
 
 
 
 
 
 
 
 


== Structures ==
== Structures ==
Overview of test structures

Revision as of 14:33, 25 December 2023

Danube River is a tool, which generates you GDS2 files which you then can manufacture with your prototype process flow in order to validate parameters and adjust your recipes until the values are within a desired range.

So far, the only opportunity we had to try the new test layout generator, was with Global Foundries on their 180nm node, of which the result can be seen in the picture below:

A successful tapeout with GF180
A successful tapeout with GF180

GDS2 view

The upper left section in the above image corresponds with the layout extracted from KLayout, when opening up the layout used for the tape-out alt=The KLayout view of the Danube GF180|none|frame|KLayout view of the Danube GF180 layout

Structures

Overview of test structures