Danube River

From LibreSilicon
Revision as of 14:33, 25 December 2023 by Leviathan (talk | contribs)
Jump to navigation Jump to search

Danube River is a tool, which generates you GDS2 files which you then can manufacture with your prototype process flow in order to validate parameters and adjust your recipes until the values are within a desired range.

So far, the only opportunity we had to try the new test layout generator, was with Global Foundries on their 180nm node, of which the result can be seen in the picture below:

A successful tapeout with GF180
A successful tapeout with GF180

GDS2 view

The upper left section in the above image corresponds with the layout extracted from KLayout, when opening up the layout used for the tape-out alt=The KLayout view of the Danube GF180|none|frame|KLayout view of the Danube GF180 layout

Structures

Overview of test structures